Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study

• Zeynep Özcan and
• Afife Binnaz Hazar Yoruç

Beilstein J. Nanotechnol. 2024, 15, 256–269, doi:10.3762/bjnano.15.24

• examining the binding of PEG to PDA/Fe3O4 NPs and the resulting chemical structure using FTIR spectroscopy. According to the FTIR analysis results, the peak at 585 cm–1 in the spectrum corresponds to the vibration associated with the Fe–O bond in magnetic nanoparticles [49]. The peak observed at 3400 cm–1

• multifunctional PEGylated magnetic nanoparticles coated with polydopamine (PDA) exhibit strong near-infrared absorption because of the PDA layer and have the ability to deliver drugs under a magnetic field owing to their superparamagnetism [51]. During the drug loading studies, the anticancer drug vinorelbine was

• of Fe3O4 NPs was 67.72 emu/g; PDA/Fe3O4 NPs had a saturation magnetization of 65.62 emu/g; VNB/PDA/Fe3O4 NPs showed a saturation magnetization of 60.40 emu/g, as shown in Figure 4c. The observed decrease in magnetization is commonly attributed to the polymer coating on the surface of the magnetic

Ferromagnetic resonance spectra of linear magnetosome chains

• Elizaveta M. Gubanova and
• Nikolai A. Usov

Beilstein J. Nanotechnol. 2024, 15, 157–167, doi:10.3762/bjnano.15.15

• of magnetic anisotropy, the direction of the particle easy anisotropy axes, and other parameters. In addition, the FMR spectrum is sensitive to the presence of magnetostatic interactions in dense assemblies of magnetic nanoparticles. Thus, ferromagnetic resonance spectroscopy is a promising technique

• distance between the particle centers in a chain is a = D + 2Ten. When modeling the FMR spectra of magnetosome chains, it is important to choose the adequate magnetic damping constant κ of the magnetic nanoparticles. Unfortunately, experimental data for this quantity for assemblies of magnetic

• = 20–25. Therefore, in this work most of the calculations were carried out for magnetosome chains with Np = 20. As noted above, the experimental data on the value of the magnetic damping constant in assemblies of magnetic nanoparticles are scarce. Since magnetosomes grow inside a bacterium under strict

Green SPIONs as a novel highly selective treatment for leishmaniasis: an in vitro study against Leishmania amazonensis intracellular amastigotes

• Brunno R. F. Verçoza,
• Robson R. Bernardo,
• Luiz Augusto S. de Oliveira and
• Juliany C. F. Rodrigues

Beilstein J. Nanotechnol. 2023, 14, 893–903, doi:10.3762/bjnano.14.73

• the effects of using iron oxide nanoparticles [11][12][15][33][34][35]. Recently, the effects of magnetic iron oxide nanoparticles were demonstrated in L. mexicana axenic amastigotes. First, the amastigotes were treated with 200 µg/mL of magnetic nanoparticles. Subsequently, magnetic hyperthermia was

• applied using an alternating field of 30 mT with a frequency of 452 kHz for 40 min. The results showed that magnetic hyperthermia was efficient in killing L. mexicana axenic amastigotes [12]. Another study demonstrated the anti-Leishmania effect of magnetic nanoparticles synthesized by green chemistry in

• of drug conjugation with magnetic nanoparticles for treating leishmaniasis. Conclusion The use of SPIONs synthesized with coconut water to treat macrophages infected with Leishmania amazonensis intracellular amastigotes revealed a significant anti-Leishmania effect with a selectivity index more than

Specific absorption rate of randomly oriented magnetic nanoparticles in a static magnetic field

• Ruslan A. Rytov and
• Nikolai A. Usov

Beilstein J. Nanotechnol. 2023, 14, 485–493, doi:10.3762/bjnano.14.39

• hyperthermia; magnetic nanoparticles; magnetic particle imaging; specific absorption rate; static magnetic field; Introduction Magnetic nanoparticles, mainly iron oxides, are promising materials for the diagnosis and therapy of oncological diseases [1][2][3]. Important fields of application of magnetic

• nanoparticles in biomedicine are magnetic particle imaging (MPI) [4][5][6] and magnetic hyperthermia (MH) [1][2][6][7]. Magnetic hyperthermia uses the ability of magnetic nanoparticles to generate heat under the influence of an external alternating (ac) magnetic field of moderate frequency, f = 200–400 kHz, and

• amplitude, Hac = 100–200 Oe [1][7][8]. In magnetic hyperthermia, magnetic nanoparticles are introduced into the tumor and heated by absorbing the energy of the ac magnetic field. The intensity of heat release is characterized by the specific absorption rate (SAR) of an assembly. Maintaining a temperature in

Polymer nanoparticles from low-energy nanoemulsions for biomedical applications

• Santiago Grijalvo and
• Carlos Rodriguez-Abreu

Beilstein J. Nanotechnol. 2023, 14, 339–350, doi:10.3762/bjnano.14.29

• the absolute value of the surface zeta potential as a result of charge screening. Hydrophobic (oleic acid-coated) magnetic nanoparticles have also been incorporated into PLGA nanoparticles prepared from Kolliphor® EL and Polysorbate 80 nanoemulsions [59]. The starting nanoemulsions had an average

Recent progress in cancer cell membrane-based nanoparticles for biomedical applications

• Qixiong Lin,
• Yueyou Peng,
• Yanyan Wen,
• Xiaoqiong Li,
• Donglian Du,
• Weibin Dai,
• Wei Tian and
• Yanfeng Meng

Beilstein J. Nanotechnol. 2023, 14, 262–279, doi:10.3762/bjnano.14.24

• patients and has shown promise for medical prospects. Some of the applications related to biomimetic cancer cell membrane-coated agents are listed and described below. 5.1 Magnetic resonance imaging Magnetic nanoparticles are widely used in magnetic resonance imaging (MRI) because they can improve imaging

Two-step single-reactor synthesis of oleic acid- or undecylenic acid-stabilized magnetic nanoparticles by thermal decomposition

• Mykhailo Nahorniak,
• Pamela Pasetto,
• Jean-Marc Greneche,
• Volodymyr Samaryk,
• Sandy Auguste,
• Anthony Rousseau,
• Nataliya Nosova and
• Serhii Varvarenko

Beilstein J. Nanotechnol. 2023, 14, 11–22, doi:10.3762/bjnano.14.2

• , wüstite), particularly nanosized particles, show distinct effects on living organisms. Thus, it is of primary importance for their biomedical applications that the morphology and phase-structural state of these materials are investigated. The aim of this work was to obtain magnetic nanoparticles in a

• obtained in a solvent with a high boiling point via displacement reaction of acetylacetone with a higher acid from Fe(III) acetylacetonate during its elimination from the reaction mixture under vacuum conditions. Magnetic nanoparticles (NPM) were characterized in terms of morphology, hydrodynamic diameter

• . Keywords: Fe(III) acetylacetonate; iron oxide nanoparticles; maghemite; magnetic nanoparticles; magnetite; thermal decomposition synthesis; Introduction Magnetic nanoparticles are increasingly being used in various fields thanks to the recent progress in their controlled synthesis and knowledge of their

Studies of probe tip materials by atomic force microscopy: a review

• Ke Xu and
• Yuzhe Liu

Beilstein J. Nanotechnol. 2022, 13, 1256–1267, doi:10.3762/bjnano.13.104

• mechanical properties of the cantilever beam directly affect the performance, measurement resolution, and image quality of the AFM instrument. AFM probe tips [9][10] are generally fabricated with coatings, carbon nanotubes, magnetic nanoparticles, or even protein functionalization. A combination of probe

Theranostic potential of self-luminescent branched polyethyleneimine-coated superparamagnetic iron oxide nanoparticles

• Rouhollah Khodadust,
• Ozlem Unal and
• Havva Yagci Acar

Beilstein J. Nanotechnol. 2022, 13, 82–95, doi:10.3762/bjnano.13.6

• nanoparticles (12.5 mg/mL) contain 380 µg Erb/mL. PIC and pGFP loading to luminescent magnetic nanoparticles (SPION@bPEI/PIC or SPION@bPEI/pGFP) Polyinosinic–polycytidylic acid sodium salt (Sigma-Aldrich, USA) was dissolved in nuclease-free water to a final concentration of 10 mg/mL. In order to make double

• images related to polymer-coated magnetic nanoparticles show that these nanoparticles seem to be agglomerated, which is due to the protruding of near particles under vacuum. It is difficult to see the PEI polymer coating around the crystal by TEM. However, it is possible to distinguish the polymer

• difficult to distinguish the percentage of magnetite and maghemite in magnetic nanoparticles. However, electron paramagnetic resonance (EPR) spectroscopy analysis can be applied to overcome this problem. According to EPR spectroscopy results, SPION@bPEI nanoparticles synthesized in situ were composed of 23

Heating ability of elongated magnetic nanoparticles

• Elizaveta M. Gubanova,
• Nikolai A. Usov and
• Vladimir A. Oleinikov

Beilstein J. Nanotechnol. 2021, 12, 1404–1412, doi:10.3762/bjnano.12.104

• of magnitude with an increase in the volume fraction of nanoparticles in a cluster in the range of 0.04–0.2. Keywords: elongated magnetic nanoparticles; magnetic hyperthermia; numerical simulation; specific absorption rate; Introduction Magnetic nanoparticle assemblies have great potential for the

• use in biomedicine, in particular, in magnetic hyperthermia [1][2][3][4], a new promising approach for cancer treatment. In this method, magnetic nanoparticles introduced into a tumor and excited by an alternating (ac) low-frequency magnetic field are able to warm up malignant tissues locally. In most

• cases this stops the tumor growth and results in its decay. However, it are magnetic nanoparticles with low toxicity and a high specific absorption rate (SAR) of the energy of the ac magnetic field that are needed in magnetic hyperthermia. The use of optimized assemblies of magnetic nanoparticles can

Biocompatibility and cytotoxicity in vitro of surface-functionalized drug-loaded spinel ferrite nanoparticles

• Sadaf Mushtaq,
• Khuram Shahzad,
• Tariq Saeed,
• Anwar Ul-Hamid,
• Bilal Haider Abbasi,
• Nafees Ahmad,
• Waqas Khalid,
• Muhammad Atif,
• Zulqurnain Ali and
• Rashda Abbasi

Beilstein J. Nanotechnol. 2021, 12, 1339–1364, doi:10.3762/bjnano.12.99

• permeability and retention (EPR) effect [7]. Magnetic nanoparticles (MNPs) have gained significant attention as effective drug delivery systems due to their distinct physiochemical attributes, high surface-to-volume ratio, and the possibility of surface functionalization [8]. Furthermore, magnetic-field

Use of nanosystems to improve the anticancer effects of curcumin

• Andrea M. Araya-Sibaja,
• Norma J. Salazar-López,
• Krissia Wilhelm Romero,
• José R. Vega-Baudrit,
• J. Abraham Domínguez-Avila,
• Carlos A. Velázquez Contreras,
• Ramón E. Robles-Zepeda,
• Mirtha Navarro-Hoyos and
• Gustavo A. González-Aguilar

Beilstein J. Nanotechnol. 2021, 12, 1047–1062, doi:10.3762/bjnano.12.78

• that respond to external stimuli (i.e., magnetic nanoparticles and photodynamic therapy). Previous studies showed that the effects of CUR were improved when loaded into nanosystems as compared to the free compound, as well as synergist effects when it is co-administrated alongside with other molecules

• anticancer activity, including liposomes, nanoemulsions, nanocrystals, nanosuspensions, and polymeric nanoparticles, as well as dual effect nanosystems which respond to external stimuli (mainly magnetic nanoparticles and photodynamic therapy), in addition to internal ones. Furthermore, key design factors

• respond to various external stimuli such as light [125], magnetic fields [126], ultrasound [127] and electric fields [128], or magnetic nanocarriers that respond to changes in pH by increasing the selectivity of the release site [129]. Magnetic nanoparticles (MNP). Magnetic nanoparticles contain molecules

Recent progress in actuation technologies of micro/nanorobots

• Ke Xu and
• Bing Liu

Beilstein J. Nanotechnol. 2021, 12, 756–765, doi:10.3762/bjnano.12.59

• a magnetically actuated robotic system capable of fully automated manipulation of cells and microbeads and prepared a magnetic U-shaped robot, which was actuated with five electromagnetic coil controllers to generate a gradient magnetic field. In order to prepare a magnetic U-shaped robot, magnetic

• nanoparticles and photoresist are uniformly mixed and a U-shaped pattern is processed by photolithography. The robot could capture and automatically transport microbeads injected with chemicals to specific locations in neurons under the control of a gradient magnetic field, which has potential applications in

Recent progress in magnetic applications for micro- and nanorobots

• Ke Xu,
• Shuang Xu and
• Fanan Wei

Beilstein J. Nanotechnol. 2021, 12, 744–755, doi:10.3762/bjnano.12.58

• this article, recent progress in magnetic applications in the field of micro- and nanorobots is reviewed. First, the achievements of manufacturing micro- and nanorobots by incorporating different magnetic nanoparticles, such as diamagnetic, paramagnetic, and ferromagnetic materials, are discussed in

• performance of magnetic micro- and nanorobots in microbial environments, some future challenges are outlined, and the prospects of magnetic applications for micro- and nanorobots are presented. Keywords: magnetic drives; magnetic nanoparticles; magnetoelectric devices; micro- and nanorobots; Introduction

• transportation of cargo [22][23], and transmit energy. Compared with other concepts, magnetic MNRs that combine diamagnetic, paramagnetic, and ferromagnetic materials [24] could have a greater driving force and exhibit characteristics such as biocompatibility [25]. Hence, magnetic nanoparticles (MNPs) are widely

A review on nanostructured silver as a basic ingredient in medicine: physicochemical parameters and characterization

• Gabriel M. Misirli,
• Kishore Sridharan and
• Shirley M. P. Abrantes

Beilstein J. Nanotechnol. 2021, 12, 440–461, doi:10.3762/bjnano.12.36

• AgNPs, adding new features to the nanoparticles. For example, with the addition of nickel or iron in the production of bimetallic silver nanoparticles, Ag@Ni or Ag@Fe, respectively [42], the nanoparticles acquire magnetic properties. These magnetic nanoparticles have the potential to be used in

Differences in surface chemistry of iron oxide nanoparticles result in different routes of internalization

• Barbora Svitkova,
• Vlasta Zavisova,
• Veronika Nemethova,
• Martina Koneracka,
• Miroslava Kretova,
• Filip Razga,
• Monika Ursinyova and
• Alena Gabelova

Beilstein J. Nanotechnol. 2021, 12, 270–281, doi:10.3762/bjnano.12.22

• easily manufactured and biocompatible. Also, there are physiologically well tolerated as iron is an essential nutrient for almost all life forms [6]. Iron oxide nanoparticles are the only one FDA-approved magnetic nanoparticles for biomedical application (Resovist). Efficient cellular internalization of

Free and partially encapsulated manganese ferrite nanoparticles in multiwall carbon nanotubes

• Saja Al-Khabouri,
• Salim Al-Harthi,
• Toru Maekawa,
• Mohamed E. Elzain,
• Ashraf Al-Hinai,
• Ahmed D. Al-Rawas,
• Abbsher M. Gismelseed,
• Ali A. Yousif and
• Myo Tay Zar Myint

Beilstein J. Nanotechnol. 2020, 11, 1891–1904, doi:10.3762/bjnano.11.170

• agents [4]. In addition, encapsulating magnetic nanoparticles inside carbon nanotubes enables the handling of the tubes via magnetic forces, thereby avoiding the alteration of their electronic or mechanical properties when using them in nanoelectronics [5]. Moreover, carbon nanotubes filled with magnetic

Transient coating of γ-Fe₂O₃ nanoparticles with glutamate for its delivery to and removal from brain nerve terminals

• Konstantin Paliienko,
• Artem Pastukhov,
• Michal Babič,
• Daniel Horák,
• Olga Vasylchenko and
• Tatiana Borisova

Beilstein J. Nanotechnol. 2020, 11, 1381–1393, doi:10.3762/bjnano.11.122

• drug release from nanoparticles to manipulate neuronal cells [9][15]. Release of receptor agonists and antagonists from thermally sensitive magnetoliposomes loaded with iron oxide magnetic nanoparticles can be remotely controlled by weak alternating magnetic fields facilitating the modulation of

Magnetic-field-assisted synthesis of anisotropic iron oxide particles: Effect of pH

• Andrey V. Shibaev,
• Petr V. Shvets,
• Darya E. Kessel,
• Roman A. Kamyshinsky,
• Anton S. Orekhov,
• Sergey S. Abramchuk,
• Alexei R. Khokhlov and
• Olga E. Philippova

Beilstein J. Nanotechnol. 2020, 11, 1230–1241, doi:10.3762/bjnano.11.107

• the dipole–dipole interaction between their building blocks (small hexagonal faceted magnetite nanocrystals), which are formed during the first step of the reaction. The study suggests a facile, green and controllable method for synthesizing anisotropic magnetic nanoparticles in the absence of

• stabilizers, which is important for further modification of their surfaces and/or incorporation of the nanoparticles into different media. Keywords: anisotropic nanoparticles; magnetic nanoparticles; magnetite; nanorods; transmission electron microscopy; Introduction The research field dedicated to the

• the fact that neither toxic nor expensive reagents are used during the process, this method provides a facile and environmentally safe way to obtain anisotropic magnetic nanoparticles. However, there is still a lack of understanding of how the morphology and properties of synthesized nanoparticles can

Influence of the magnetic nanoparticle coating on the magnetic relaxation time

• Mihaela Osaci and
• Matteo Cacciola

Beilstein J. Nanotechnol. 2020, 11, 1207–1216, doi:10.3762/bjnano.11.105

• . Upon reaching the tumour, the magnetic nanoparticles are locally subjected to an alternating magnetic field, generating heat that kills the cancer cells [1]. The heat is generated due to two phenomena: Néel relaxation (an internal phenomenon driven by the rotation of the particle magnetic moment inside

• generating heat. This heat increases the tumour cell temperature which leads to cell death [1][2][3][4]. Iron-oxide magnetic nanoparticles, in particular magnetite (Fe3O4) and maghemite (γ-Fe2O3), have been intensely studied in the context of magnetic hyperthermia applications. These nanoparticles can be

• synthesized in small dimensions, which ensures low toxicity and the possibility for easy surface functionalization. A common method for synthesising iron-oxide nanoparticles includes chemical co-precipitation, which involves the simultaneous precipitation of magnetic nanoparticles and a solid matrix through a

Applications of superparamagnetic iron oxide nanoparticles in drug and therapeutic delivery, and biotechnological advancements

• Maria Suciu,
• Corina M. Ionescu,
• Alexandra Ciorita,
• Septimiu C. Tripon,
• Dragos Nica,
• Hani Al-Salami and
• Lucian Barbu-Tudoran

Beilstein J. Nanotechnol. 2020, 11, 1092–1109, doi:10.3762/bjnano.11.94

• particles), in order to destroy the tumor tissue in which it accumulated. This core–shell complex showed no toxicity in vitro and in vivo, but when placed in a radio frequency field it generated high temperatures, and thus, tumor tissue damage. New colloidally stable multi-core iron oxide magnetic

• nanoparticles, without doping or doped with rare earth metals, were designed in our labs for the use in MRI. Our studies showed that their effects on cells depend on the cell type, cluster design and concentration [158][159]. Asgari et al. [160] produced 50 nm SPION–carbon dot nanoparticles, which were designed

Wet-spinning of magneto-responsive helical chitosan microfibers

• Dorothea Brüggemann,
• Johanna Michel,
• Naiana Suter,
• Matheus Grande de Aguiar and
• Michael Maas

Beilstein J. Nanotechnol. 2020, 11, 991–999, doi:10.3762/bjnano.11.83

• biotechnological and tissue engineering applications. However, there are only a few methods available for the production of biocompatible helical microfibers. Given that, we present here a simple technique for the fabrication of helical chitosan microfibers with embedded magnetic nanoparticles. Composite fibers

• in which freshly-spun alginate fibers containing magnetic nanoparticles were fixed with a magnetized conical tip and rotated around micropillars, acquiring a helical shape with three to four windings [47]. Non-scalable procedures, such as high-temperature synthesis, photolithography or the use of

• organic templates are examples of alternative ways to synthesize helical nano- or microfibers from various materials like carbon nanotubes (CNTs), ZnO or different polymers [8][48][49]. Here, we present a simple method for synthesizing helical chitosan microfibers with embedded magnetic nanoparticles

Nanoarchitectonics: bottom-up creation of functional materials and systems

• Katsuhiko Ariga

Beilstein J. Nanotechnol. 2020, 11, 450–452, doi:10.3762/bjnano.11.36

• hydroxide/sepiolite hybrids [31], and cell surface engineering with halloysite-doped silica cell imprints for shape recognition of human cells [32]. In another example, magnetic nanoparticles were attached to microbubble shells for enhanced biomedical imaging [33]. In a final example, the detection of the

Dynamics of superparamagnetic nanoparticles in viscous liquids in rotating magnetic fields

• Nikolai A. Usov,
• Ruslan A. Rytov and
• Vasiliy A. Bautin

Beilstein J. Nanotechnol. 2019, 10, 2294–2303, doi:10.3762/bjnano.10.221

• .10.221 Abstract The dynamics of magnetic nanoparticles in a viscous liquid in a rotating magnetic field has been studied by means of numerical simulations and analytical calculations. In the magneto-dynamics approximation three different modes of motion of the unit magnetization vector and particle

• SAR values of the order of 400–500 W/g can be obtained in a rotating magnetic field with a frequency f = 400 kHz and a moderate magnetic field amplitude H0 = 100 Oe. Keywords: magnetic hyperthermia; magnetic nanoparticles; numerical simulation; rotating magnetic field; specific absorption rate

• ; viscous liquid; Introduction Magnetic nanoparticles are promising materials in various areas of biomedicine [1][2][3][4], such as magnetic resonance imaging [5][6][7], targeted drug delivery [8][9][10], and magnetic hyperthermia [11][12][13][14][15][16][17][18][19][20]. Iron oxide nanoparticles are most

Targeted therapeutic effect against the breast cancer cell line MCF-7 with a CuFe₂O₄/silica/cisplatin nanocomposite formulation

• B. Rabindran Jermy,
• Vijaya Ravinayagam,
• Widyan A. Alamoudi,
• Dana Almohazey,
• Hatim Dafalla,
• Lina Hussain Allehaibi,
• Abdulhadi Baykal,
• Muhammet S. Toprak and
• Thirunavukkarasu Somanathan

Beilstein J. Nanotechnol. 2019, 10, 2217–2228, doi:10.3762/bjnano.10.214

• Chemistry, School of Basic Sciences, Vels Institute of Science, Technology and Advanced Studies (VISTAS), Chennai 600117, India 10.3762/bjnano.10.214 Abstract The combination of magnetic nanoparticles with a porous silica is a composite that has attracted significant attention for potential multifunctional